Description
75 Litre Underslung Waste Water Tank FULL KIT for VW Crafter Man TGE 2017 onwards– Fits FWD MWB & LWB
Medium and Long Wheelbase Models Only
Does not fit models with twin sliding doors
Waste Tank – Fittings Pre-Welded – Galvanised Brackets and fixings
This waste tank is designed to fit along the driver’s side sill behind the driver’s door. Capacity of 75 litres.
Fixing kit supplied with 3 x galvanised brackets, 3 x 5 inch hookbolts and 3 x 6 inch hookbolts all with locking nuts.
The sill side of the brackets require the 6 inch hookbolts and the chassis side of the brackets require the 5 inch hookbolts.
All sill side 6” hookbolts hook into pre-existing sill bungs. Remove bung, hook in, then replace bung with small notch cut to allow for hookbolt.
All chassis side 5” hookbolts hook into pre existing holes in the base of the chassis.
Two pre-welded fittings included. 1 x 25mm drain on rear face of tank and 1 x 20mm inlet on side face of tank chassis side.
Recommend the use of smooth bore supaflex hose which is ultra flexible.
This tank can also be used for fresh, pressure fill (back fill) or gravity fill. Also available as a plain tank with nut in fittings. See separate listings.
KIT CONTAINS:-
1 x CAK- 238 Waste Water Tank 75 Litre with pre welded fittings (1 x 20mm inlet and 1 x 25mm drain) and 3 breathers
1 x set of 3 custom made galvanised steel brackets
3 x 5” hookbolts with locking nuts
3 x 6” hookbolts with locking nuts
1 x drain tap with short hose and 2 x hose clips
OPTIONALS:-
– 1x Waste Water Level Gauge with Read out Panel (MTT/R)
– Defrost element (DFE-02)
20mm supaflex grey hose to fit inlet (H3SG)
Reviews
There are no reviews yet.